0001160: 'Secret' channels are showing

(0006217)
OUTsider (developer)
2012-07-17 20:29

Way too old and checked entire code, nothing to be found that could cause this

(0006200)
OUTsider (developer)
2012-07-15 18:54

still applies?

(0005445)
Hal9000 (administrator)
2010-07-04 12:06

sphtml only has effect on the generated html file.
setting all mode_* to N on restart is normal behavior, so there must be some problem on burst.
i will set up ircu soon on the test vm and try to reproduce/fix the problem.

(0005444)
craze (reporter)
2010-07-03 22:56

A (very) similar issue was reproduced using Denora 1.4.4 with phpDenora on ircu2.10.12. Denora has sphtml enabled, and backend is mysql.

Channels getting a +p or +s while Denora is connected are hidden from web as expected. However, if any of these also has +D (delayed join) set, they reappear on web when Denora is restarted. Channels without +D are still hidden as intended.

When restarting Denora, all the mode_* fields for affected channels are set to N in the mysql database, regardless of the actual mode set on IRC. Apparently only occurs to channels with +D set and during burst, at least on the ircu protocol. Channels set (-D)+d are not affected.

(0005441)
Hal9000 (administrator)
2010-07-03 11:58

waiting for user feedback...

(0005439)
Hal9000 (administrator)
2010-07-03 10:51

stupid question: have you actually enabled the sphtml option??

(0005418)
Hal9000 (administrator)
2010-05-16 18:10

can you confirm that in the chan table, the mode_ls column is set to N for #services for example?

(0005415)
shade (reporter)
2010-05-06 23:57

charybdis-3.3(20100415-a224ec22c54c)

(0005414)
Hal9000 (administrator)
2010-05-06 23:35

oh im sorry, of course mysql is not part of the problem so my tip was useless...
what ircd version is your denora running on?

(0005413)
shade (reporter)
2010-05-06 23:19

Enabled mysql (was disabled before), ran utility, restarted denora, and regenerated stats -- still shows +s channels such as #services

(0005412)
Hal9000 (administrator)
2010-05-06 22:47

please try to run ./mydbgen utility and restart denora, and see if the problem persists.

Notes
(0006217) OUTsider (developer) 2012-07-17 20:29	Way too old and checked entire code, nothing to be found that could cause this

(0006200) OUTsider (developer) 2012-07-15 18:54	still applies?

(0005445) Hal9000 (administrator) 2010-07-04 12:06	sphtml only has effect on the generated html file. setting all mode_* to N on restart is normal behavior, so there must be some problem on burst. i will set up ircu soon on the test vm and try to reproduce/fix the problem.

(0005444) craze (reporter) 2010-07-03 22:56	A (very) similar issue was reproduced using Denora 1.4.4 with phpDenora on ircu2.10.12. Denora has sphtml enabled, and backend is mysql. Channels getting a +p or +s while Denora is connected are hidden from web as expected. However, if any of these also has +D (delayed join) set, they reappear on web when Denora is restarted. Channels without +D are still hidden as intended. When restarting Denora, all the mode_* fields for affected channels are set to N in the mysql database, regardless of the actual mode set on IRC. Apparently only occurs to channels with +D set and during burst, at least on the ircu protocol. Channels set (-D)+d are not affected.

(0005441) Hal9000 (administrator) 2010-07-03 11:58	waiting for user feedback...

(0005439) Hal9000 (administrator) 2010-07-03 10:51	stupid question: have you actually enabled the sphtml option??

(0005418) Hal9000 (administrator) 2010-05-16 18:10	can you confirm that in the chan table, the mode_ls column is set to N for #services for example?

(0005415) shade (reporter) 2010-05-06 23:57	charybdis-3.3(20100415-a224ec22c54c)

(0005414) Hal9000 (administrator) 2010-05-06 23:35	oh im sorry, of course mysql is not part of the problem so my tip was useless... what ircd version is your denora running on?

(0005413) shade (reporter) 2010-05-06 23:19	Enabled mysql (was disabled before), ran utility, restarted denora, and regenerated stats -- still shows +s channels such as #services

(0005412) Hal9000 (administrator) 2010-05-06 22:47	please try to run ./mydbgen utility and restart denora, and see if the problem persists.

Issue History
Date Modified	Username	Field	Change
2010-05-06 20:11	shade	New Issue
2010-05-06 22:47	Hal9000	Note Added: 0005412
2010-05-06 23:19	shade	Note Added: 0005413
2010-05-06 23:35	Hal9000	Note Added: 0005414
2010-05-06 23:57	shade	Note Added: 0005415
2010-05-16 18:10	Hal9000	Note Added: 0005418
2010-07-03 10:51	Hal9000	Note Added: 0005439
2010-07-03 11:58	Hal9000	Note Added: 0005441
2010-07-03 11:58	Hal9000	Assigned To	=> Hal9000
2010-07-03 11:58	Hal9000	Status	new => feedback
2010-07-03 22:56	craze	Note Added: 0005444
2010-07-04 12:06	Hal9000	Note Added: 0005445
2010-07-18 12:16	Hal9000	Status	feedback => assigned
2011-02-03 22:05	Hal9000	Target Version	=> 1.5.0-git
2012-07-15 18:54	OUTsider	Note Added: 0006200
2012-07-15 18:54	OUTsider	Status	assigned => feedback
2012-07-17 20:29	OUTsider	Note Added: 0006217
2012-07-17 20:29	OUTsider	Status	feedback => closed
2012-07-17 20:29	OUTsider	Resolution	open => fixed

Relationships